Home Board Products PICMG 1.3 SHB

  • Supports Intel® Pentium® 4 processors in a PICMG 1.3 form factor
  • Supports Graphics-class backplanes with a x16 PCI Express lane
  • DDR2-677 memory interface, four SATA/300 ports with RAID and video
  • Product lifecycle of 5 to 7+ years with an industry leading 5-year warranty


  • Overview
  • Tech Specs
  • Downloads
  • Options
  • Contact Us
  • »Designed for applications requiring an Intel® Pentium® 4 processor
  • »Graphics-class board with PCI Express x16 and x4 lane support for the backplane devices and option card slots
  • »Stable long-life product cycle and a 5-year factory warranty
  • »Product designed, manufactured and supported at our U. S. facilities
PROCESSORS

Single Intel® Pentium® 4 651 series Processor with 800MHZ FSB, 2MB L2 cache
Single Intel® Pentium® 4 531 series Processor with 800MHZ FSB, 1MB L2 cache

*other CPU options are available with non-embedded support

BIOS (FLASH)

The T4L uses AMIBIOS8®. The flash BIOS resides in the Firmware Hub (FWH).

CHIPSET


The Intel® 945G Chipset with the Intel® ICH7R I/O Controller Hub

MEMORY

4GB (max), dual-channel DDR-667 interface with 2 sockets

VIDEO INTERFACE

Intel® Graphics Media Accelerator 950

ETHERNET INTERFACES


Intel® 82563EB Ethernet controller - Two 10/100/1000Base-T on I/O Bracket Connectors
Intel® 82563E  Ethernet controller - One 10/100/1000Base-T interface routed to SBC connector "C"

ON-BOARD INTERFACES

8 USB 2.0 ports - 2 via I/O bracket ports, 4 via on-board headers, 2 routed to SHB connector "C" 
1 Ultra ATA/100
4 SATA II/300 interfaces with RAID 0, 1, 5 and 10 support - four on board headers

WATCHDOG TIMER

Built in I/O Controller Hub two stage Watchdog timer range of 1ms to 10 minutes.

BATTERY

Lithium - CMOS data retention

MECHANICAL

T4L Dimensions = 13.330" (33.858cm) L x 4.976" (12.639cm) H
Std. Cooling Height Range = 2.38" (60.45mm) to 2.53" (64.33mm)

AGENCY APPROVALS & COMPLIANCE

UL60950, CAN/CSA C22.2 No. 60950-00, EN55022:1998Class B, EN61000-4-2:1995, EN61000-4-3:1997, EN61000-4-4:1995, EN61000-4-5:1995, EN61000-4-6:1996, EN61000-4-11:1994

MEAN TIME BETWEEN FAILURES (MTBF)


MTBF = 196,855 Power-On Hours (POH) at 40 C per Belcore

POWER REQUIREMENTS - 100% stressed

Typical Values - 100% Stressed via MS Windows HCT's System Stress

CPU +5V +12V +3.3V
3.4GHz† 3.60A 4.42A 3.27A
3.0GHz* 2.64A 6.70A 3.27A

-12V @ <100mA Tolerance for all voltages is +/- 5% and must be applied by the PICMG 1.3 backplane to edge connector C.

(†) Intel® Pentium® 4 651, (*)Intel® Pentium® 4 531

POWER REQUIREMENTS - Idle


Typical Values - System Idling In Windows XP Desktop

CPU +5V +12V +3.3V
3.4GHz 2.56A 1.53A 3.27A
3.0GHz 2.40A 2.50A 3.27A

* Check Technical Reference Manual for additional CPU processor speeds and system parameters/notes.

OPERATING TEMPERATURE
Operating Temperature: 0° to 45° C.
Storage Temperature: -40 to 70 C.
ENVIRONMENTAL
Humidity: 5% to 90% non-condensing
Airflow Requirement: 300LFM continuous airflow
SYSTEM HARDWARE MONITOR

Monitor Voltages, Fan Speed and Temperature

DATASHEET

Datasheet for T4L, Pentium 4, PICMG 1.3

PRODUCT MANUAL

Manual for T4L, Pentium 4, PICMG 1.3

DRIVERS

Intel® Chipset Software Installation Utility

Intel® PRO/1000 MT Network & Server Adapters

Intel® SATA Raid Drivers

Compatible Backplanes

PICMG 1.0



Contact Us


To help us prevent spam, please answer the equation below