T4G |6130| Features Intel Pentium 4 Single Board Computer (SBC)

Supports an Intel^® Pentium^® 4 processor on a PICMG 1.0 form factor
Cost effective solution for low end computing applications
Graphics and memory hub supports 2D and 3D video and graphics
Embedded lifecycle support
Trenton desinged, manufactured, and supported at our U. S. facilities

Overview
Tech Specs
Downloads
Options
Contact Us

»Designed as a cost effective SBC solution with an Intel^® Pentium^® 4 processor
»Coupled with Trenton PICMG 1.0 backplane, this SBC provides PCI-X, PCI, ISA card support
»Stable long life product that mazimizes system ROI
»Designed, manufactured and supported at our U. S. facilities

FORM FACTOR

PICMG 1.0 Single Board Computer

PROCESSORS

Intel® Pentium® 4 Processor - 2.8MHz with 533MHz FSB, 512K L2 Cache
Intel® Pentium® 4 Processor - 2.4MHz with 533MHz FSB, 512K L2 Cache
Intel® Pentium® 4 Processor - 2.0MHz with 400MHz FSB, 512K L2 Cache

*other CPU options are available with non-embedded support

BIOS (FLASH)

AMI AMIBIOS® 8

CHIPSET

The Intel® 845GV Chipset with the Intel® ICH4 I/O Controller Hub

MEMORY

2GB (max), single channel DDR-266 interface with 2 sockets

VIDEO INTERFACE

Internal to the 845GV GMCH, 8MB Memory (selectable dynamically up to 64MB) up to 2048 x 1536 (QXGA) pixel resolutions

ETHERNET INTERFACES

Internal to Intel® ICH4 I/O Controller Hub - One 10/100Base-T Ethernet interface on I/O bracket

ON-BOARD INTERFACES

Two, USB 2.0 Ports via the SBC I/O bracket
Two, Ultra ATA/100 interfaces via on-board headers
Two, Serial interfaces via on-board headers
One, Parallel interface via an on-board header
One, Floppy interface via an on-board header
One, PS/2 Keyboard and Mouse Port via the SBC I/O bracket

WATCHDOG TIMER

The I/O Controller Hub features an integrated, two stage Watchdog timer with programmable reset ranges of 30ms to 60 seconds.

BATTERY

Lithium - CMOS data retention

MECHANICAL

T4G Dimensions = 13.33" (33.858cm) L x 4.80" (12.19cm) H
Standard Cooling Height Range = 2.18" (55.37mm) to 2.33" (59.25mm)

AGENCY APPROVALS & COMPLIANCE

UL60950, CAN/CSA C22.2 No. 60950-00, EN55022:1998 Class B, EN61000-4-2:1995, EN61000-4-3:1997, EN61000-4-4:1995, EN61000-4-5:1995, EN61000-4-6:1996, EN61000-4-11:1994

MEAN TIME BETWEEN FAILURES (MTBF)

157,945 POH (Power-On Hours) at 40 C, per Bellcore

POWER REQUIREMENTS - 100% stressed

Typical Values