BPG7087 | 14-Slot PCI Express Backplane | Video Processing | GPU Computing
- Delivers flexibility in video processing, graphics or GPU computing systems
- Backplane supports multiple Matrox® video and NVIDIA® GPU cards
- Features ten PCI Express 2.0 option card slots
- All slots use x16 PCIe mechanical interface card connectors
*See the Configuration section under the Tech Spec tab for slot interface details Suggested SHBs Trenton models - JXT6966, JXTS6966, TSB7053, TQ9 and TML FORM FACTOR 14-slot form factor supports one combo or graphics-class, PICMG 1.3 SHB and up to ten PCI Express Gen 2.0 or Gen 1.1 option cards. All card slots use x16 PCIe mechanical connectors and four of these slots are driven with x16 PCIe 2.0 electrical interfaces. SHB CONFIGURATION Any combo or graphics-class PICMG 1.3 system host board including Trenton's JXT6966, JXTS6966, TSB7053, TQ9 or TML with optional IOB33 or IOB31 plug-in modules CONFIGURATION Graphics: Four PCIe x16 and six PCIe x4 (all x16 mechanical) slots Note 2: Backplane slots PCIe3 through PCIe10 may operate as PCIe 2.0 slots depending on the end point devices installed into these slots and regardless of the system host board x16 root link type. Note 3: Backplane slots PCIe1 and PCIe2 operate as PCIe 2.0 slots when both the SHB and end point device supports the Gen 2 interface. Note 4: Backplane slot PCIe2 requires either an optional IOB33 or IOB31 interface module on the SHB in order to make this card slot functional. Note 5: Video, graphics or GPU cards with a x16 PCI Express interface should be connected into backplane slots PCIe4, PCIe6, PCIe8 and/or PCIe10 to take full advantage of the x16 link speed. MECHANICAL Board dimensions: 12.3” x 12.9” with a minimum drive tower cut-out of 14.53 square inches The nominal backplane thickness is 0.080”; however, the backplane mounting holes are recessed 0.018” on the bottom to provide an effective PCB thickness of 0.062” for use in the chassis design process. AGENCY APPROVALS & COMPLIANCE Designed for UL60950 and CAN/CSA C22.2 No.60950-00, EN55022:1998 Class B, EN61000-4-2:1995, EN61000-4-3:1997, EN61000-4-4:1995, EN61000-4-5:1995, EN61000-4-6:1996, EN61000-4-11:1994 POWER CONNECTORS ATX/EPS power source - one vertical 24-position ATX/EPS connector +12V AUX power source - two vertical 8-position connectors Extended power source - one 10-position terminal block to supply additional power if needed POWER INDICATORS +5V, +5V AUX, +12V, and +3.3V power connection and status ENVIRONMENTAL Operating Temp: 0°C to 60°C Storage Temp: -20° to 70°C Humidity: 5% to 90% non-condensing Trenton's BPG7087 is a lead free, RoHS compliant backplane. DATASHEET MECHANICAL DRAWINGS BLOCK DIAGRAM CONFIGURATION DETAILS
Compatible Single Board Computers PICMG 1.3
|
