TVC4402 | 4U Video Wall Controller | 10 Video Controller Cards | Single Board Computer (TVC4402)

TVC4402

The following CPUs are available for use with the TSB7053 SBC option:
Intel® Xeon® E3-1275 Processor - Quad core, 3.4GHz with Hyper-Threading, 8MB cache
Intel® Xeon® E3-1225 Processor - Quad core, 3.1GHz without Hyper-Threading, 6MB cache
Intel® Core™ i3-2120  Processor - Dual core, 3.3GHz with Hyper-Threading, 3MB cache

These long-life, advanced server, Sandy Bridge processors feature a 2.5GT/s DMI interface to the board's C206 PCH, an 800MHz integrated graphics frequency and support Intel® AMT 7.0 system applications.

The following CPUs are available for use with JXT6966 or JXTS6966 SBC options:
Intel® Xeon® EC5549 Processor - Quad core, 2.53GHz with Hyper-Threading, 8MB cache
Intel® Xeon® EC5539 Processor - Dual core, 2.27GHz without Hyper-Threading, 4MB cache
Intel® Xeon® EC5509 Processor - Quad core, 2.0GHz  without Hyper-Threading, 8MB cache
Intel® Xeon® LC5528 Processor - Quad core, 2.13GHz with Hyper-Threading, 8MB cache

Consult Trenton for additional processor options.

The TVC4402 is a 4U video controller that supports up to ten of the latest video cards used in advanced display wall applications with large data storage requirements.  The TVC4402 features a Trenton single board computer such as the single processor TSB7053 or JXTS6966 or the dual processor JXT6966.  The video controller supports a variety of 14-slot backplanes including the BPG7087 PCI Express 2.0 backplane.  Video controller storage options support up to eight front access / hot swap storage drives.  Flexible system power options are available to support multiple video card types and display wall configurations.

Trenton's BPG7087 backplane is one of the 14-slot backplanes featured in the TVC4402 video controller.  This backplane supports one graphics-class, PICMG 1.3 SHB such as the TSB7053 and up to ten PCI Express Gen 2.0 video cards.  PCIe Gen 1.1 option cards are also supported in the TVC4402.  All card slots use x16 PCIe mechanical connectors and four of the BPG7087 slots are driven with x16 PCI Express electrical interfaces.

Backplane Type: PICMG 1.3 Graphics-Class
Option Card Slots: Four PCIe x16 electrical, six PCIe x4 electrical slots (all slots use x16 PCIe mechanical connectors)

Note 1: Optional IOB33 or IOB31 module required on the TSB7053 to provide a x4 PCIe electrical link to backplane slot PCIe2. If the system is using a JXTS6966 or JXT6966 SBC then the IOB expansion link is a x1 PCIe electrical link.

Note 2: Backplane slots PCIe3 through PCIe10 may operate as PCIe 2.0 slots depending on the end point devices installed into these slots and regardless of the system host board x16 root link type.

Note 3: Backplane slots PCIe1 and PCIe2 operate as PCIe 2.0 slots when both the SHB and end point device supports the Gen 2 interface.

EIA RS-310C 19” Rackmount Standard

Lightweight, rugged aluminum

Black

19" Rackmount Video Controller, 4U enclosure height, single or dual-processor single board computer with a 14-slot backplane in a lightweight, rugged aluminum enclosure with four front access HDD drive carriers, two internal drive storage bays, a slim-line optical drive, front panel USB ports with rear panel I/O ports and PCI Express 2.0 option card slots

Available SBC and backplane conbinations in the TVC4402 may support up to ten, x16 PCI Express video controller boards

4 - Front removable and hot swap 3.5” drive bays support up to eight 2.5" HDD carriers and 1 - Slim-line device bay for optical drive media

Options include: Single ATX/EPS P/S up to 1500W, fixed - OR - Mini-redundant ATX P/S up to 500W

3 - 120mm Fans (center-mounted), 90 CFM each

LEDs for HDD activity and Power Status

Front: 2 USB

Rear: 2 - Ethernet LANs, 2 - USB and 1 - VGA Video, 10 - Option Card Slots

Additional rear panel I/O available when using the optional IOB33 module on the TSB7053

Power On/Off and System Reset

48.3cm (W) x 17.8cm (H) x 50.8cm (D) (with 19" rackmount handles installed)

19.0" (W) x 7.0” (H) x 20.0” (D) (with 19" rackmount handles installed)