MCP6792 | MicroTCA Processor AMC (PrAMC) (MCP6792)

Operates directly in a MicroTCA backplane or an AdvancedTCA carrier card
Designed with the Small Form Factor (SFF) Intel® Core™ 2 Duo Processor
Low-power AMC with impressive DDR3 memory performance
4GB system memory, PCI Express links and Gigabit Ethernet interfaces
Product lifecycle of 5-7+ years with an industry leading 5-year warranty

Overview
Tech Specs
Downloads
Options
Contact Us

»Designed with the Intel® Core™ 2 Duo Processor for robust multi-core applications
»Good fit for embedded Telecom or Military COTS applications
»Supports 10/100/1000Base-BX interfaces and PCIe links on a MicroTCA backplane
»Intel® Trusted Execution Technology (Intel® TXT), Intel® Virtualization Technology (Intel® VT) and an on-board TPM 1.2 for Trusted Computing applicatiions
»Low Power AMC with 4GB of DDR3 memory support, on-board SSD storage options and more
»Product designed, manufactured, and supported by Trenton here in the USA

Technical specifications shown below are representative of a typical system. For additional options or configurations, please contact us.

FORM FACTOR

PICMG® AMC.0, R2.0 (AMC), PICMG® MTCA.0, R1.0 (uTCA) and PICMG® 3.0, R3.0 (ATCA) form-factor specifications. Consult datasheet for complete PICMG specification listings.

PROCESSORS

One Intel® Core™ 2 Duo Processor SP9300 - 2.26GHz, SFF, 1066MHz FSB, 6MB L2 Cache
One Intel® Core™ 2 Duo Processor SL9400 - 1.86GHz, SFF, 1066MHz FSB, 6MB L2 Cache
One Intel® Core™ 2 Duo Processor SU9300 - 1.2GHz, SFF, 800MHz FSB, 3MB L2 Cache

BIOS (FLASH)

AMI AMIBIOS® 8

CHIPSET

Mobile Intel® GS45 Express Chipset with Intel® ICH9M I/O Controller Hub (SFF packages)

MEMORY

4GB (max), dual-channel DDR3-1066 interface with two SO-DIMM sockets

VIDEO INTERFACE

Internal to the GS45 GMCH via the Gen 5.0 graphics architecture with BIOS selectable shared memory

ETHERNET INTERFACES

Intel® 825567 Ethernet PHY - One 10/100/1000Base-T interface on AMC front panel
Intel® 82571EB Dual Port Ethernet Controller - Two 1000Base-BX Ethernet interfaces routed to card edge connector

ON-BOARD INTERFACES

Two USB 2.0 ports - two on full-size front panel or one on mid-size front panel
One Serial port - on full-size front panel only
Solid State Drive - dedicated USB interface for USB storage drives

BATTERY

Lithium - CMOS data retention

MECHANICAL

MCP6792 Dimensions = 7.11" (18.05cm) L x 2.89" (7.34cm) H
Single-width/Full-size Front Panel Height = 1.103" (28.00mm)
Single-width/Mid-size Front Panel Height = 0.709" (18.00mm)

AGENCY APPROVALS & COMPLIANCE

Designed for UL60950, CAN/CSA C22.2 No. 60950-00, EN55022:1998 Class B, EN61000-4-2:1995, EN61000-4-3:1997, EN61000-4-4:1995, EN61000-4-5:1995, EN61000-4-6:1996, EN61000-4-11:1994 and NEBS/ETSI compliance

MEAN TIME BETWEEN FAILURES (MTBF)

MTBF = 96,890 Power-On Hours (POH) at 40° C per Bellcore

POWER REQUIREMENTS - 100% stressed

Typical Values - 100% CPU Stress State with 4GB of memory

CPU	+12V	+3.3V*
2.26GHz	2.70A	0.15A
1.86GHz	2.08A	0.15A

POWER REQUIREMENTS - Idle

Typical Values - CPU Idle State with 4GB of memory

CPU	+12V	+3.3V*
2.26GHz	1.17A	0.15A
1.86GHz	1.09A	0.15A

* Check Technical Reference Manual for additional processor speeds and system parameters.

OPERATING TEMPERATURE

Operating Temperature:

-5° to 55° C.

ENVIRONMENTAL

Airflow Requirement:	300LFM continuous airflow
Humidity:	5% to 90% non-condensing
Storage Temperature:	-20° to 70° C.

EDGE CARD INTERFACES

PCI Express Links:	One x4 link or Four x1 links plus One x1 link and a PCIe reference clock
PCIe Link Configuration:	A six-position dip switch enables multiple PCIe link configurations
Ethernet:	Two 1000Base-BX Ethernet interfaces
SATA:	Two Serial ATA/300 (SATA II 300) interfaces
IPMB:	One Intelligent Platform Management Bus for use by the card's Module Management Controller (MMC) in IPMI implementations