LEGACY - MCP6792

PICMG® AMC.0, R2.0 (AMC), PICMG® MTCA.0, R1.0 (uTCA) and PICMG® 3.0, R3.0 (ATCA) form-factor specifications.  Consult datasheet for complete PICMG specification listings.

One Intel® Core™ 2 Duo Processor SP9300 - 2.26GHz, SFF, 1066MHz FSB, 6MB L2 Cache
One Intel® Core™ 2 Duo Processor SL9400 - 1.86GHz, SFF, 1066MHz FSB, 6MB L2 Cache
One Intel® Core™ 2 Duo Processor SU9300 - 1.2GHz, SFF, 800MHz FSB, 3MB L2 Cache

AMI AMIBIOS® 8

Mobile Intel® GS45 Express Chipset with Intel® ICH9M I/O Controller Hub (SFF packages)

4GB (max), dual-channel DDR3-1066 interface with two SO-DIMM sockets

Internal to the GS45 GMCH via the Gen 5.0 graphics architecture with BIOS selectable shared memory

Intel® 825567 Ethernet PHY - One 10/100/1000Base-T interface on AMC front panel
Intel® 82571EB Dual Port Ethernet Controller - Two 1000Base-BX Ethernet interfaces routed to card edge connector

Two USB 2.0 ports - two on full-size front panel or one on mid-size front panel
One Serial port - on full-size front panel only
Solid State Drive - dedicated USB interface for USB storage drives

Lithium - CMOS data retention

MCP6792 Dimensions = 7.11" (18.05cm) L x 2.89" (7.34cm) H
Single-width/Full-size Front Panel Height = 1.103" (28.00mm)
Single-width/Mid-size Front Panel Height = 0.709" (18.00mm)

Designed for UL60950, CAN/CSA C22.2 No. 60950-00, EN55022:1998 Class B, EN61000-4-2:1995, EN61000-4-3:1997, EN61000-4-4:1995, EN61000-4-5:1995, EN61000-4-6:1996, EN61000-4-11:1994 and NEBS/ETSI compliance

MTBF = 96,890 Power-On Hours (POH) at 40° C per Bellcore

Typical Values - 100% CPU Stress State with 4GB of memory

Typical Values - CPU Idle State with 4GB of memory

* Check Technical Reference Manual for additional processor speeds and system parameters.